Items where Division is "Faculty of Engineering" and Year is 2019

Ab Aziz, Muhammad Aizat (2019) An evaluation of an exoskeleton to assist pole handling during manual oil palm harvesting activity. [Project Paper] (Submitted)

Ab Halim, Aimi Amira (2019) Image-based leaf analysis for detection of nitrogen status in sweet corn production. [Project Paper] (Submitted)

Abd Malik, Nursakinah (2019) Smart environmental monitoring for hydroponic system. [Project Paper] (Submitted)

Abd Rahman, Muhamad Zharfanzuhair (2019) IoT: feasibility study of long range (LORA) wireless sensing system for smart farm management. [Project Paper] (Submitted)

Abdul Hamid, Ahmad Shahid (2019) Quality assessment of oil palm fresh fruit bunches using backscattering imaging. [Project Paper] (Submitted)

Abdul Karim, Nuraszniza (2019) Comparison study of ultrasound and microwave pre-treatments on yield optimization of agarwood oil. [Project Paper] (Submitted)

Ahmad Fuad, Mohamad Syazwan (2019) Mechanichal and antimicrobial properties of pla/jackfruit skin composites containing thymol and nanocellulose. [Project Paper] (Submitted)

Ahmad Murad, Fathin Khairunnisa (2019) Effect of air frying on texture and quality of doughnut. [Project Paper] (Submitted)

Amat Sadikin, Muhammad Khairil Fahmier (2019) Evaluation of a process-based model for the estimation of nitrogen losses in a flooded rice system. [Project Paper] (Submitted)

Azman, Nur Ayuni Aziera (2019) Properties of starch/nanocellulose composite film containing thymol for food packaging application. [Project Paper] (Submitted)

Azmy, Nur Syahida Laila (2019) Design of a small scale factory for pomegranate juice. [Project Paper] (Submitted)

Camara, Malick (2019) Water balance study for the agricultural sector in Malaysia. [Project Paper] (Submitted)

Dalliah, Reuben Loxin (2019) Comparison between portable hand seeder and hand trans planter in terms of field capacity and growth rate of planted sweet corn. [Project Paper] (Submitted)

Daros, Rohaidi (2019) Optimal routes for oil palm biomass transportation to biomass facility by using linear programming (LP) model. [Project Paper] (Submitted)

Elkwiee, Areej Amr Abdelazim (2019) The role of clay nano-particles in the phytoremediation process. [Project Paper] (Submitted)

Goh, Yee Nie (2019) Development of LoRaWAN communication system to monitor soil electrical conductivity and pH in oil palm nursery. [Project Paper] (Submitted)

Hassan, Nur Kamila (2019) Effect of drying methods on colour, total phenolic, total flavonoid content and antioxidants of jackfruit leaves. [Project Paper] (Submitted)

Ismail, Nurul Athirah (2019) Development of an indoor UAV testing facility for aerial agricultural chemical spraying. [Project Paper] (Submitted)

Jamaludin, Noorfarhah Jasmin (2019) Erosion induced landslide susceptibility map for agriculture area at Cameron Highlands, Pahang. [Project Paper] (Submitted)

Jameri, Shukry (2019) Tabletop universal testing machine for soft solids. [Project Paper] (Submitted)

Johari, Nurulnadiah (2019) Design of a small scale factory for yam bean snack (sengkuang calit). [Project Paper] (Submitted)

John Peter, Beatrice (2019) Development of a conceptual design of oil palm frond cutter to be integrated with climber robot. [Project Paper] (Submitted)

Juharidan, Fatin Nabihah (2019) Performance evaluation of a mobile dryer for field corn production. [Project Paper] (Submitted)

Juharidan, Fatin Nabihah (2019) Performance evaluation of a mobile dryer for field corn production. [Project Paper] (Submitted)

Jusoh, Siti Azura (2019) Effect of operating parameters on the oil yield and chemical compounds of agarwood ( Aquilaria Malaccensis ) oil by hydrodistillation extraction. [Project Paper] (Submitted)

Kader Sahib, Farah (2019) The development of energy harvesting system from the motion during manual oil palm harvesting. [Project Paper] (Submitted)

Kamaludin, Nor Faridah Hanim (2019) Oil palm interactive map for plantation management. [Project Paper] (Submitted)

Kaulan, Aminudin (2019) Feasibility design study on a rapid planter based on gun-type mechanism. [Project Paper] (Submitted)

Kayalan, Muhammad Azri Asyraf (2019) Determination of irrigation delivery at oil palm nursery. [Project Paper] (Submitted)

Khoy, Shi Feng (2019) An IoT-based monitoring and controlling system for irrigation and fertilization under plant factory. [Project Paper] (Submitted)

Lee, Yi Yik (2019) Effects of high pressure processing (HPP) on microstructure and rheological properties of goat milk. [Project Paper] (Submitted)

Lim, Kai Loon (2019) Potential conversion of oil palm biomass into bio-products by using mixed-integer linear programming (MILP) model. [Project Paper] (Submitted)

Mahazer, Nurul Marhanis (2019) Utilization of food waste and kitchen waste as poultry feed. [Project Paper] (Submitted)

Mailan, Junaidah (2019) Development of integrated hydroponic embedded with floatovoltaic system for crops cultivation. [Project Paper] (Submitted)

Manab, Amirah (2019) The optimisation of carbon sources in sustainable biosurfactant production using general algebraic modelling system. [Project Paper] (Submitted)

Manjang, Lamin (2019) Study on hydroponic system for lettuce and tomato production under controlled environment. [Project Paper] (Submitted)

Mat Zakhi, Nazifa Athirah (2019) Optimal application of biosurfactant by using linear programming (LP) model. [Project Paper] (Submitted)

Md Noor, Mohd Faris Murshidi (2019) A low cost aerial remote sensing platform for counting oil palm trees. [Project Paper] (Submitted)

Md Noor, Mohd Faris Murshidi (2019) A low cost aerial remote sensing platform for counting oil palm trees. [Project Paper] (Submitted)

Mohamad, Norsyahirah (2019) Color kinetics and quality of fresh pineapple juice packed in polylactic acid-5% zinc oxide nanoparticles (PLA-5%ZnO NPs) composite films during chilling storage. [Project Paper] (Submitted)

Mohamad Said, Afif Ikram (2019) Design and development of a pusher mechanism for automated SRI transplanter. [Project Paper] (Submitted)

Mohamad Toel, Nor Fatin Syafiqah (2019) GIS and UAV aerial imaging applications for durian plantation management. [Project Paper] (Submitted)

Mohamed Khair, Norhafizah (2019) Effects of using nanobubble liquid on the physical properties of hard ice cream. [Project Paper] (Submitted)

Mohammad Aminuddin, Safwan Mukmin (2019) Determination of water footprint of oil palm fresh fruit bunches in Malaysia. [Project Paper] (Submitted)

Mohammed Salleh, Nurhanisah (2019) Extraction and concentration of sweet potato juice. [Project Paper] (Submitted)

Mohd Fauzi, Emir Muhammad Hazieq (2019) Revamp of existing laboratory scale electrolytic cell for electrolyzed water study in cleaning application. [Project Paper] (Submitted)

Mohd Halim, Zafirah (2019) Characterization and utilization of Azolla pinnata with decanter cake waste as poultry feed. [Project Paper] (Submitted)

Mohd Halimi, Nur Zaleqha (2019) Effects of banana peel flour concentrations on the texturel quality of ice cream waffle cone. [Project Paper] (Submitted)

Mohd Jais, Nurain (2019) Effects of oat and flour composition on the stickiness and moisture content of cookie dough and their performance evaluation on the cookies shaping machine. [Project Paper] (Submitted)

Mohd Khalil, Nurul Nasyitah (2019) Monitoring soil properties of inoculated and uninoculated basal stem rot (BSR) in oil palm seedling. [Project Paper] (Submitted)

Mohd Omar, Jusrianti (2019) Clarification of guava juice using membrane-based process. [Project Paper] (Submitted)

Mohd Pilus, Nurfateha (2019) Evaluation of rainfall effect on groundwater recharge using SWAT Jenderam Hilir. [Project Paper] (Submitted)

Mohd Rozali, Hazil Azry (2019) The suitable discharge rate in determine the aquifer characteristic using pumping test. [Project Paper] (Submitted)

Mohd Salleh, Ain Nadira (2019) Image-based leaf analysis for detection of soil water status in sweet corn production. [Project Paper] (Submitted)

Mohd Taufek, Fatin Najibah (2019) Effect of particle size and compressibility on the flowability of wheat, cornstarch, tapioca and atta flours. [Project Paper] (Submitted)

Mohd Yusoff, Ain Farhana (2019) Design of irrigation system for Orthosiphon stamineus (misai kucing) cultivated under solar PV. [Project Paper] (Submitted)

Ng, Khai Yee (2019) Effects of high pressure processing on physicochemical, antioxidant and microbiological properties of fresh and stored Malaysian honeys. [Project Paper] (Submitted)

Nik Mat Zin, Nik Baihaqi (2019) Evaluation of sugar palm yarn as reinforcement in anti-roll bar. [Project Paper] (Submitted)

Noor Azmi, Nur Nabilah (2019) Design of a device to sample ammonia gas emission from flooded rice system. [Project Paper] (Submitted)

Noor Azmi, Nur Nabilah (2019) Design of a device to sample ammonia gas emission from flooded rice system. [Project Paper] (Submitted)

Noor Hisham, Nurul Asyiqin (2019) Effects of processing parameters on the physical and textural quality of ice cream wafer cone. [Project Paper] (Submitted)

Othman, Nuraina Nabihah (2019) Effect of particle size and compressibility on flowability of cumin, coriander, chili and turmeric spices. [Project Paper] (Submitted)

Paul, Cassandra Simah (2019) Development of solar powered automated watering system. [Project Paper] (Submitted)

Rahmat, Muhammad Ammar Syaheed (2019) Develop a formulation for the production of soilless growth media with nutrient-rich and water-storing using Azolla Pinnata. [Project Paper] (Submitted)

Romzi, Nur Alia Syafiqah (2019) Characterization of local sweet potato starch-based films at different varieties : vitato and anggun. [Project Paper] (Submitted)

Sabang, Diana Sabryna Sirah (2019) Detection of oil palm fronds using vision system. [Project Paper] (Submitted)

Sahirin, Khairul Azraai (2019) Development of a clean-cut cocoa pod splitter. [Project Paper] (Submitted)

Samson, Laura (2019) Evaluation of tapioca starch in slow release fertilizer composition for rubber seedlings. [Project Paper] (Submitted)

Samsuri, Ahmad Shafie (2019) Design and development of palm oil trimmer. [Project Paper] (Submitted)

Satap, Presley Jali (2019) Gaseous ozone pasteurization of brown rice milk. [Project Paper] (Submitted)

Shaffie, Salina (2019) Effect of marine gelatin on the rheological and physical properties of gummy candy. [Project Paper] (Submitted)

Shahril, Khairun Nisa Shahani (2019) Development of passion fruit oil nanoemulsion using combination of food grade surfactants. [Project Paper] (Submitted)

Syed Idros, Syed Abdullah Khaired (2019) Vibration attenuation study in axial-lateral rotary cutter for oil palm frond chopping. [Project Paper] (Submitted)

Tajul Arifin, Nurfatin Nabila (2019) Preparation and characterization of fish-gelatin based films. [Project Paper] (Submitted)

Tan, Jin Tian (2019) The effect of methylcellulose coating during deep frying process of sweet potato strips. [Project Paper] (Submitted)

Tan, Sok Fern (2019) Physico-chemical and microbiological properties of high pressure treated cow and goat milk. [Project Paper] (Submitted)

Tie, Hieng Ong (2019) Optimization of palm oil extraction from decanter cake by using Soxhlet extraction. [Project Paper] (Submitted)

Wan Idris, Wan Mas Anira (2019) Design of an educational agricultural engineering module for a community outreach program aimed to nurture students interests in agriculture. [Project Paper] (Submitted)

Zafri, Muhammad Hakim (2019) Effect of high pressure pasteurization of ice cream mix on the quality of ice cream. [Project Paper] (Submitted)

Zainal, Mohamad Azri (2019) Farmbot genesis setup for indoor farm management. [Project Paper] (Submitted)

Zakaria, Nur Zuriati (2019) Potential food development from different parts of sweet potato plant. [Project Paper] (Submitted)