Items where Division is "Faculty of Engineering" and Year is 2019

A

Ab Aziz, Muhammad Aizat (2019) An evaluation of an exoskeleton to assist pole handling during manual oil palm harvesting activity. [Project Paper] (Submitted)

Ab Halim, Aimi Amira (2019) Image-based leaf analysis for detection of nitrogen status in sweet corn production. [Project Paper] (Submitted)

Abd Malik, Nursakinah (2019) Smart environmental monitoring for hydroponic system. [Project Paper] (Submitted)

Abd Rahman, Muhamad Zharfanzuhair (2019) IoT: feasibility study of long range (LORA) wireless sensing system for smart farm management. [Project Paper] (Submitted)

Abdul Hamid, Ahmad Shahid (2019) Quality assessment of oil palm fresh fruit bunches using backscattering imaging. [Project Paper] (Submitted)

Abdul Karim, Nuraszniza (2019) Comparison study of ultrasound and microwave pre-treatments on yield optimization of agarwood oil. [Project Paper] (Submitted)

Ahmad Fuad, Mohamad Syazwan (2019) Mechanichal and antimicrobial properties of pla/jackfruit skin composites containing thymol and nanocellulose. [Project Paper] (Submitted)

Ahmad Murad, Fathin Khairunnisa (2019) Effect of air frying on texture and quality of doughnut. [Project Paper] (Submitted)

Amat Sadikin, Muhammad Khairil Fahmier (2019) Evaluation of a process-based model for the estimation of nitrogen losses in a flooded rice system. [Project Paper] (Submitted)

Azman, Nur Ayuni Aziera (2019) Properties of starch/nanocellulose composite film containing thymol for food packaging application. [Project Paper] (Submitted)

Azmy, Nur Syahida Laila (2019) Design of a small scale factory for pomegranate juice. [Project Paper] (Submitted)

C

Camara, Malick (2019) Water balance study for the agricultural sector in Malaysia. [Project Paper] (Submitted)

D

Dalliah, Reuben Loxin (2019) Comparison between portable hand seeder and hand trans planter in terms of field capacity and growth rate of planted sweet corn. [Project Paper] (Submitted)

Daros, Rohaidi (2019) Optimal routes for oil palm biomass transportation to biomass facility by using linear programming (LP) model. [Project Paper] (Submitted)

E

Elkwiee, Areej Amr Abdelazim (2019) The role of clay nano-particles in the phytoremediation process. [Project Paper] (Submitted)

G

Goh, Yee Nie (2019) Development of LoRaWAN communication system to monitor soil electrical conductivity and pH in oil palm nursery. [Project Paper] (Submitted)

H

Hassan, Nur Kamila (2019) Effect of drying methods on colour, total phenolic, total flavonoid content and antioxidants of jackfruit leaves. [Project Paper] (Submitted)

I

Ismail, Nurul Athirah (2019) Development of an indoor UAV testing facility for aerial agricultural chemical spraying. [Project Paper] (Submitted)

J

Jamaludin, Noorfarhah Jasmin (2019) Erosion induced landslide susceptibility map for agriculture area at Cameron Highlands, Pahang. [Project Paper] (Submitted)

Jameri, Shukry (2019) Tabletop universal testing machine for soft solids. [Project Paper] (Submitted)

Johari, Nurulnadiah (2019) Design of a small scale factory for yam bean snack (sengkuang calit). [Project Paper] (Submitted)

John Peter, Beatrice (2019) Development of a conceptual design of oil palm frond cutter to be integrated with climber robot. [Project Paper] (Submitted)

Juharidan, Fatin Nabihah (2019) Performance evaluation of a mobile dryer for field corn production. [Project Paper] (Submitted)

Juharidan, Fatin Nabihah (2019) Performance evaluation of a mobile dryer for field corn production. [Project Paper] (Submitted)

Jusoh, Siti Azura (2019) Effect of operating parameters on the oil yield and chemical compounds of agarwood ( Aquilaria Malaccensis ) oil by hydrodistillation extraction. [Project Paper] (Submitted)

K

Kader Sahib, Farah (2019) The development of energy harvesting system from the motion during manual oil palm harvesting. [Project Paper] (Submitted)

Kamaludin, Nor Faridah Hanim (2019) Oil palm interactive map for plantation management. [Project Paper] (Submitted)

Kaulan, Aminudin (2019) Feasibility design study on a rapid planter based on gun-type mechanism. [Project Paper] (Submitted)

Kayalan, Muhammad Azri Asyraf (2019) Determination of irrigation delivery at oil palm nursery. [Project Paper] (Submitted)

Khoy, Shi Feng (2019) An IoT-based monitoring and controlling system for irrigation and fertilization under plant factory. [Project Paper] (Submitted)

L

Lee, Yi Yik (2019) Effects of high pressure processing (HPP) on microstructure and rheological properties of goat milk. [Project Paper] (Submitted)

Lim, Kai Loon (2019) Potential conversion of oil palm biomass into bio-products by using mixed-integer linear programming (MILP) model. [Project Paper] (Submitted)

M

Mahazer, Nurul Marhanis (2019) Utilization of food waste and kitchen waste as poultry feed. [Project Paper] (Submitted)

Mailan, Junaidah (2019) Development of integrated hydroponic embedded with floatovoltaic system for crops cultivation. [Project Paper] (Submitted)

Manab, Amirah (2019) The optimisation of carbon sources in sustainable biosurfactant production using general algebraic modelling system. [Project Paper] (Submitted)

Manjang, Lamin (2019) Study on hydroponic system for lettuce and tomato production under controlled environment. [Project Paper] (Submitted)

Mat Zakhi, Nazifa Athirah (2019) Optimal application of biosurfactant by using linear programming (LP) model. [Project Paper] (Submitted)

Md Noor, Mohd Faris Murshidi (2019) A low cost aerial remote sensing platform for counting oil palm trees. [Project Paper] (Submitted)

Md Noor, Mohd Faris Murshidi (2019) A low cost aerial remote sensing platform for counting oil palm trees. [Project Paper] (Submitted)

Mohamad, Norsyahirah (2019) Color kinetics and quality of fresh pineapple juice packed in polylactic acid-5% zinc oxide nanoparticles (PLA-5%ZnO NPs) composite films during chilling storage. [Project Paper] (Submitted)

Mohamad Said, Afif Ikram (2019) Design and development of a pusher mechanism for automated SRI transplanter. [Project Paper] (Submitted)

Mohamad Toel, Nor Fatin Syafiqah (2019) GIS and UAV aerial imaging applications for durian plantation management. [Project Paper] (Submitted)

Mohamed Khair, Norhafizah (2019) Effects of using nanobubble liquid on the physical properties of hard ice cream. [Project Paper] (Submitted)

Mohammad Aminuddin, Safwan Mukmin (2019) Determination of water footprint of oil palm fresh fruit bunches in Malaysia. [Project Paper] (Submitted)

Mohammed Salleh, Nurhanisah (2019) Extraction and concentration of sweet potato juice. [Project Paper] (Submitted)

Mohd Fauzi, Emir Muhammad Hazieq (2019) Revamp of existing laboratory scale electrolytic cell for electrolyzed water study in cleaning application. [Project Paper] (Submitted)

Mohd Halim, Zafirah (2019) Characterization and utilization of Azolla pinnata with decanter cake waste as poultry feed. [Project Paper] (Submitted)

Mohd Halimi, Nur Zaleqha (2019) Effects of banana peel flour concentrations on the texturel quality of ice cream waffle cone. [Project Paper] (Submitted)

Mohd Jais, Nurain (2019) Effects of oat and flour composition on the stickiness and moisture content of cookie dough and their performance evaluation on the cookies shaping machine. [Project Paper] (Submitted)

Mohd Khalil, Nurul Nasyitah (2019) Monitoring soil properties of inoculated and uninoculated basal stem rot (BSR) in oil palm seedling. [Project Paper] (Submitted)

Mohd Omar, Jusrianti (2019) Clarification of guava juice using membrane-based process. [Project Paper] (Submitted)

Mohd Pilus, Nurfateha (2019) Evaluation of rainfall effect on groundwater recharge using SWAT Jenderam Hilir. [Project Paper] (Submitted)

Mohd Rozali, Hazil Azry (2019) The suitable discharge rate in determine the aquifer characteristic using pumping test. [Project Paper] (Submitted)

Mohd Salleh, Ain Nadira (2019) Image-based leaf analysis for detection of soil water status in sweet corn production. [Project Paper] (Submitted)

Mohd Taufek, Fatin Najibah (2019) Effect of particle size and compressibility on the flowability of wheat, cornstarch, tapioca and atta flours. [Project Paper] (Submitted)

Mohd Yusoff, Ain Farhana (2019) Design of irrigation system for Orthosiphon stamineus (misai kucing) cultivated under solar PV. [Project Paper] (Submitted)

N

Ng, Khai Yee (2019) Effects of high pressure processing on physicochemical, antioxidant and microbiological properties of fresh and stored Malaysian honeys. [Project Paper] (Submitted)

Nik Mat Zin, Nik Baihaqi (2019) Evaluation of sugar palm yarn as reinforcement in anti-roll bar. [Project Paper] (Submitted)

Noor Azmi, Nur Nabilah (2019) Design of a device to sample ammonia gas emission from flooded rice system. [Project Paper] (Submitted)

Noor Azmi, Nur Nabilah (2019) Design of a device to sample ammonia gas emission from flooded rice system. [Project Paper] (Submitted)

Noor Hisham, Nurul Asyiqin (2019) Effects of processing parameters on the physical and textural quality of ice cream wafer cone. [Project Paper] (Submitted)

O

Othman, Nuraina Nabihah (2019) Effect of particle size and compressibility on flowability of cumin, coriander, chili and turmeric spices. [Project Paper] (Submitted)

P

Paul, Cassandra Simah (2019) Development of solar powered automated watering system. [Project Paper] (Submitted)

R

Rahmat, Muhammad Ammar Syaheed (2019) Develop a formulation for the production of soilless growth media with nutrient-rich and water-storing using Azolla Pinnata. [Project Paper] (Submitted)

Romzi, Nur Alia Syafiqah (2019) Characterization of local sweet potato starch-based films at different varieties : vitato and anggun. [Project Paper] (Submitted)

S

Sabang, Diana Sabryna Sirah (2019) Detection of oil palm fronds using vision system. [Project Paper] (Submitted)

Sahirin, Khairul Azraai (2019) Development of a clean-cut cocoa pod splitter. [Project Paper] (Submitted)

Samson, Laura (2019) Evaluation of tapioca starch in slow release fertilizer composition for rubber seedlings. [Project Paper] (Submitted)

Samsuri, Ahmad Shafie (2019) Design and development of palm oil trimmer. [Project Paper] (Submitted)

Satap, Presley Jali (2019) Gaseous ozone pasteurization of brown rice milk. [Project Paper] (Submitted)

Shaffie, Salina (2019) Effect of marine gelatin on the rheological and physical properties of gummy candy. [Project Paper] (Submitted)

Shahril, Khairun Nisa Shahani (2019) Development of passion fruit oil nanoemulsion using combination of food grade surfactants. [Project Paper] (Submitted)

Syed Idros, Syed Abdullah Khaired (2019) Vibration attenuation study in axial-lateral rotary cutter for oil palm frond chopping. [Project Paper] (Submitted)

T

Tajul Arifin, Nurfatin Nabila (2019) Preparation and characterization of fish-gelatin based films. [Project Paper] (Submitted)

Tan, Jin Tian (2019) The effect of methylcellulose coating during deep frying process of sweet potato strips. [Project Paper] (Submitted)

Tan, Sok Fern (2019) Physico-chemical and microbiological properties of high pressure treated cow and goat milk. [Project Paper] (Submitted)

Tie, Hieng Ong (2019) Optimization of palm oil extraction from decanter cake by using Soxhlet extraction. [Project Paper] (Submitted)

W

Wan Idris, Wan Mas Anira (2019) Design of an educational agricultural engineering module for a community outreach program aimed to nurture students interests in agriculture. [Project Paper] (Submitted)

Z

Zafri, Muhammad Hakim (2019) Effect of high pressure pasteurization of ice cream mix on the quality of ice cream. [Project Paper] (Submitted)

Zainal, Mohamad Azri (2019) Farmbot genesis setup for indoor farm management. [Project Paper] (Submitted)

Zakaria, Nur Zuriati (2019) Potential food development from different parts of sweet potato plant. [Project Paper] (Submitted)